Author Topic: LAN PROBLEM ! PLS ! HELP ME ! (Read 3830 times)

yyhsdoolbb · « **on:** June 10, 2007, 11:47:24 am »

kc gn2 mga bro dsl gmit q d2 s bhay ung 999...
kas0 dinadial q pa xa gmit ung binigay nilang user/pass
help nmn p0h mga kaspiya, ayw q kc ng-dinadial pa xa
gs2 q kc mga bro ung automatic pgbukas m0 ng router ,
automatic n coconnect ung LAN sa internet..
para d na aq ggwa ng connection kc ng-cre2ate p aq
using WAN Miniport(PPPOE) tapos dinadial q p xa

ask q lng p0h kung pan0 ung setup nya pra
mging automatic ung connection ng LAN q...
sana m2lungan ny0 q.

madcarabao · « **Reply #1 on:** June 10, 2007, 11:50:11 am »

anong bang isp mo at anong gamit mong modem? nasa config lang yan e.

MasterChief63 · « **Reply #2 on:** June 10, 2007, 12:02:43 pm »

so aside from ur Broadband modem may DSL router ka pa and u made dial up settings on ur router...

baka naman u expect ur router to dial the connection for u and not ur dsl modem, u have to configure ur modem to be "ALWAYS CONNECTED" bago mo iconfigure ung router mo to the same always connected setup, pano dadaial router mo if ur modem doesnt? san balak kumuha ng connection ung router kung walang connection ung modem?

olats · « **Reply #3 on:** June 10, 2007, 11:04:32 pm »

Looks like mali ang saksak mo sa likod ng router.
Yung cable from PLDT DSL modem dapat plug mo dun sa router port na WAN or Internet ang nakalagay.
Tapos yung mga PC mo dun sa ports na 1-4.
Sa tingin ko na-plug mo yung DSL modem mo sa 1-4 na port at hindi sa WAN/Internet port.
Paki-check nalang.
Wala ka nang gagalawin sa modem. Naka-set na yun na auto line sync siya.

JamsKigoL · « **Reply #4 on:** June 11, 2007, 12:45:29 am »

Quote from: yyhsdoolbb on June 10, 2007, 11:47:24 am

kc gn2 mga bro dsl gmit q d2 s bhay ung 999...
kas0 dinadial q pa xa gmit ung binigay nilang user/pass
help nmn p0h mga kaspiya, ayw q kc ng-dinadial pa xa
gs2 q kc mga bro ung automatic pgbukas m0 ng router ,
automatic n coconnect ung LAN sa internet..
para d na aq ggwa ng connection kc ng-cre2ate p aq
using WAN Miniport(PPPOE) tapos dinadial q p xa
ask q lng p0h kung pan0 ung setup nya pra
mging automatic ung connection ng LAN q...
sana m2lungan ny0 q.

anong gamit mong software XP HOME or PRO?

yyhsdoolbb · « **Reply #5 on:** June 11, 2007, 08:56:04 am »

Quote from: madcarabaoÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ on June 10, 2007, 11:50:11 am

anong bang isp mo at anong gamit mong modem? nasa config lang yan e.

tsong e2:
ISP --> PLDT MYDSL 999
Modem-Router tapos my Splitter --> Alcatel ADSL Home PlusPlus 500
http://img301.imageshack.us/img301/1174/8v7j9rqz8h86xx7.jpg

yyhsdoolbb · « **Reply #6 on:** June 11, 2007, 09:05:25 am »

Quote from: xtian63 on June 10, 2007, 12:02:43 pm

so aside from ur Broadband modem may DSL router ka pa and u made dial up settings on ur router...
baka naman u expect ur router to dial the connection for u and not ur dsl modem, u have to configure ur modem to be "ALWAYS CONNECTED" bago mo iconfigure ung router mo to the same always connected setup, pano dadaial router mo if ur modem doesnt? san balak kumuha ng connection ung router kung walang connection ung modem?

btw tnx s reply ^^
pero br0 modem-router w/ splitter gmit q .... tapos nka-connect xa dun sa LAN card ...
gs2 q lng p0h malaman kung pano ung settings dun s LAN pra kpg turn-on q ung router q
auto-connect na xa , without creating a NEW CONNECTION kc nga dba i created WAN Miniport(PPPOE) pra mkpg-internet aq ... senxa n p0h d me mrunong ng settings dun s LAN eh

help nmn po ! tnx

TobleRONe · « **Reply #7 on:** June 11, 2007, 09:07:54 am »

kung naka bridge mode na yan modem mo, yung router mo ico-configure mo. may installation disk na kasama naman ang iyong router. run mo lang iyon. type mo yung username and password pag hiningi, and your good to go. nakasave na sa router mo yung info about your username and password.

kung router mode naman ang modem mo, diretso na lang yan sa switch. yun nga lang icnfigure mo pa yung modem mo to auto-dial when disconnected

one more thing bro, wag naman sana text lingo/language gamitin mo, mahirap basahin minsan. computer naman gamit natin sa pagpost dito, hindi cellphone

yyhsdoolbb · « **Reply #8 on:** June 11, 2007, 09:10:02 am »

Quote from: olats on June 10, 2007, 11:04:32 pm

Looks like mali ang saksak mo sa likod ng router.
Yung cable from PLDT DSL modem dapat plug mo dun sa router port na WAN or Internet ang nakalagay.
Tapos yung mga PC mo dun sa ports na 1-4.
Sa tingin ko na-plug mo yung DSL modem mo sa 1-4 na port at hindi sa WAN/Internet port.
Paki-check nalang.
Wala ka nang gagalawin sa modem. Naka-set na yun na auto line sync siya.

br0 i only got 1 pc . . . tnx sa reply

P***sDeMilo · « **Reply #9 on:** June 11, 2007, 09:14:41 am »

i recongig mo modem mo kung gs2 mo n autoconnect xa..kc nkabridgemode yan kc may dialer e..i routermode mo n lng xa..

yyhsdoolbb · « **Reply #10 on:** June 11, 2007, 10:19:59 am »

e2 mga k-spiya ZOOM ny0 n lng
sana mk2long t0h kc d q tlga lam eh

1.
http://img301.imageshack.us/img301/5651/76485034bl9.jpg
2.
http://img301.imageshack.us/img301/5719/58365679ow1.jpg

TobleRONe · « **Reply #11 on:** June 11, 2007, 07:10:12 pm »

wala ka naman kasi dapat ginalaw sa LAN. Kung gusto mo kasi ng auto-connect sa internet yung modem or yung router dapat kinalikot mo. yung ip address na 192.168.1.1 yan yung para ma-access mo yung webpage interface ng modem mo. ita-type mo yan sa internet explorer/browser mo para dyan ka magpapalit ng setting sa modem para maconfigure na auto connect yang modem sa internet. pero pili ka muna kung ano ang set-up mo... bago para malaman ko kung ano pa ibibigay na advice.

ang set up mo ba ay...
splitter--->modem---->router----> switch/hub---->PC?
or
splitter--->modem--->PC?
or
splitter--->modem--->router--->PC

naguguluhan kasi ako sa post na nilagay mo na "modem-router with splitter tapos nakalagay sa LAN" gamit mo? alin ang nakalagay sa LAN? yung splitter? talaga naman may splitter na ikinakabit sa phone line para magamit mo dsl at phone mo ng sabay

Telesforo · « **Reply #12 on:** June 11, 2007, 07:42:21 pm »

Partner eto gawin mo.

1. set mo IP mo as static ilagay mo ay
IP Add: 192.168.1.10
Subnet: 255.255.255.0
Gateway: <leave it blank>

2. Open mo MS-Dos Prompt then execute this command
arp -a

3.Then may lalabas na result something like this:
Interface: 192.168.1.10 --- 0x10005
Internet Address Physical Address Type
192.168.1.1 00-16-a6-15-a2-06 dynamic

4. Kung anong lalabas na Internet Address sa step #3 then yun ang i access mo sa IExplorer or Firefox mo.
Ang lumabas sa step #3 is 192.168.1.1 <--- example natin yan

Sa IExplorer I view mo ang http://192.168.1.1/ or
Telnet open mo MS-Dos Prompt then execute mo lang telnet 192.168.1.1
pag nagtanong ng username at password

username: admin
password: <leave it blank>

5. Once na nakapasok ka na sa Web portal ng DSL Modem mo hanapin mo yung DSL Settings
Makikita mo dun yung dialer nya at duon mo ilagay yung username and password na ginagamit mo sa PPPoE dialer mo sa Windows XP mo.

Hope this will help...

MasterChief63 · « **Reply #13 on:** June 11, 2007, 07:49:40 pm »

try to look how u can access ur modem via web browser kc mukhang modem config ang may problem

MasterChief63 · « **Reply #14 on:** June 11, 2007, 07:50:43 pm »

Quote from: yyhsdoolbb on June 11, 2007, 09:10:02 am

Quote from: olats on June 10, 2007, 11:04:32 pm
Looks like mali ang saksak mo sa likod ng router.
Yung cable from PLDT DSL modem dapat plug mo dun sa router port na WAN or Internet ang nakalagay.
Tapos yung mga PC mo dun sa ports na 1-4.
Sa tingin ko na-plug mo yung DSL modem mo sa 1-4 na port at hindi sa WAN/Internet port.
Paki-check nalang.
Wala ka nang gagalawin sa modem. Naka-set na yun na auto line sync siya.

br0 i only got 1 pc . . . tnx sa reply

a modem... a router... a hub... on 1 pc, strikes me as unusual, have tried connecting ur PC directly to ur modem and see if magkakaron ng automatic connection(no need for dial up) na alwways connected ung modem kahit patay ung PC?

TobleRONe · « **Reply #15 on:** June 11, 2007, 08:52:49 pm »

Quote from: Telesforo on June 11, 2007, 07:42:21 pm

username: admin
password: <leave it blank>

pag hindi gumana yang walang password... try mo ilagay:
username: admin
password: admin or 1234

pili ka na lang, yan usually defualt password

olats · « **Reply #16 on:** June 11, 2007, 10:20:26 pm »

Bro, I have the same modem as yours and I am also on PLDT MyDSL.
Setup ko is Modem --> Router --> PC

Wala ka nang gagalawin sa Modem. Naka setup na yun for auto connect to DSL.
Kung isa lang PC mo, wag ka nang gumamit ng router. Sayang lang. Just stick with your PPPoE dialup method.
If you really want to use the router, just read the Quick Install Guide ng router mo.

olats · « **Reply #17 on:** June 11, 2007, 10:24:10 pm »

Quote from: xtian63 on June 11, 2007, 07:50:43 pm

a modem... a router... a hub... on 1 pc, strikes me as unusual, have tried connecting ur PC directly to ur modem and see if magkakaron ng automatic connection(no need for dial up) na alwways connected ung modem kahit patay ung PC?

I think when he says 'dialup' he's referring to the PPPoE connection. Ganon PLDT MyDSL Personal Plans e.

yyhsdoolbb · « **Reply #18 on:** June 12, 2007, 10:28:26 am »

Quote from: Telesforo on June 11, 2007, 07:42:21 pm

Partner eto gawin mo.

1. set mo IP mo as static ilagay mo ay
IP Add: 192.168.1.10
Subnet: 255.255.255.0
Gateway: <leave it blank>

2. Open mo MS-Dos Prompt then execute this command
arp -a

3.Then may lalabas na result something like this:
Interface: 192.168.1.10 --- 0x10005
Internet Address Physical Address Type
192.168.1.1 00-16-a6-15-a2-06 dynamic

4. Kung anong lalabas na Internet Address sa step #3 then yun ang i access mo sa IExplorer or Firefox mo.
Ang lumabas sa step #3 is 192.168.1.1 <--- example natin yan

Sa IExplorer I view mo ang http://192.168.1.1/ or
Telnet open mo MS-Dos Prompt then execute mo lang telnet 192.168.1.1
pag nagtanong ng username at password

username: admin
password: <leave it blank>

5. Once na nakapasok ka na sa Web portal ng DSL Modem mo hanapin mo yung DSL Settings
Makikita mo dun yung dialer nya at duon mo ilagay yung username and password na ginagamit mo sa PPPoE dialer mo sa Windows XP mo.

Hope this will help...

br0 tnx s reply m0 it really helps per0 my error
lam m0 b br0 kung pan0 t0h?
e2 ung lumalabas eh kpg enter aq log in aq s site
user: admin
pass: admin/1234

http://img301.imageshack.us/img301/1254/123bq5.jpg

Telesforo · « **Reply #19 on:** June 12, 2007, 02:16:29 pm »

Quote from: yyhsdoolbb on June 12, 2007, 10:28:26 am

br0 tnx s reply m0 it really helps per0 my error
lam m0 b br0 kung pan0 t0h?
e2 ung lumalabas eh kpg enter aq log in aq s site
user: admin
pass: admin/1234

Yang error na yan means WRONG password ka.

Nag try ka ba mag login using username as admin with no password? By default kasi ang admin ay walang password. Kasi ang ginagamit ng PLDT tech ay yung support na login ID which is for configuring only.

Pag ayaw ng blank/no password, call ka lang sa DSL cust care then ask mo sa kanila kung anong password na nilagay nila dyan.

Once na na-access mo na yung DSL Modem/Router mo:

Click mo Advance Setup > WAN > click mo yung EDIT sa right side then NEXT until makita mo ito:

Dapat walang check yung Dial on Demand

yyhsdoolbb · « **Reply #20 on:** June 12, 2007, 11:51:14 pm »

Quote

Yang error na yan means WRONG password ka.

Nag try ka ba mag login using username as admin with no password? By default kasi ang admin ay walang password. Kasi ang ginagamit ng PLDT tech ay yung support na login ID which is for configuring only.

Pag ayaw ng blank/no password, call ka lang sa DSL cust care then ask mo sa kanila kung anong password na nilagay nila dyan.

Once na na-access mo na yung DSL Modem/Router mo:

Click mo Advance Setup > WAN > click mo yung EDIT sa right side then NEXT until makita mo ito:

Dapat walang check yung Dial on Demand

tnx sa reply mahusay br0 bebe::
br0 nid ung passw0rd tlga e..pra mkps0k s site
wr0ng passw0rd pla aq kea gnyan lumlabas
o cge try q n lng twagan ung customer service nila . . .
teka br0 naguguluhan lng aq d2 . . .

br0 e2 nmn ung sa telnet , nde aq mkpgtype ng password eh.... nde q tlga malagyan ng passw0rd, ska br0 wla nmn ngyayari . . . tnx br0
http://img301.imageshack.us/img301/5407/telnetkh3.jpg

Telesforo · « **Reply #21 on:** June 13, 2007, 01:00:22 pm »

Quote from: yyhsdoolbb on June 12, 2007, 11:51:14 pm

tnx sa reply mahusay br0 bebe::
br0 nid ung passw0rd tlga e..pra mkps0k s site
wr0ng passw0rd pla aq kea gnyan lumlabas
o cge try q n lng twagan ung customer service nila . . .
teka br0 naguguluhan lng aq d2 . . .

br0 e2 nmn ung sa telnet , nde aq mkpgtype ng password eh.... nde q tlga malagyan ng passw0rd, ska br0 wla nmn ngyayari . . . tnx br0

Talagang ganyan bro. Hindi mo makikita yung password or walang movement ang cursor pag nag-telnet ka.

Goodluck ulit sa Password. Or Hanap ka ng right config nyan pag meron ka na pwede mo na syang i hard reset.
At pag hindi mo na maayos pwede ka ng magpapunta ng DSL Tech. hehehe.

Telesforo · « **Reply #22 on:** June 13, 2007, 02:12:15 pm »

Hmmm Bakit nga ba tinawanan kita sa aking last post.

So pag decided ka na to hard reset your Modem/Router (ADSL Home PlusPlus 500) eto ang regalo ko sayo:

**Hard reset button can be found at the back of your Modem/Router besides LAN Port 1**

1. set mo IP mo as static ilagay mo ay
IP Add: 192.168.1.10
Subnet: 255.255.255.0
Gateway: <leave it blank>

2. Sa IExplorer I view mo ang http://192.168.1.1/
username: admin
password: <leave it blank>

3. WAN Setting
Click Advanced Setup > WAN then EDIT mo existing na nasa right panel or create new (basta isa lang dapat ang nandun)

3.1 Set settings as shown below and click Next afterwards

3.2 click Next

3.3 click Next

3.4 click Next

3.5 click SAVE

4. DSL Settings

4.1 Set settings below, click Save/Apply and click Advance Settings

4.2 Select Normal and click Apply then Tone Selection

4.3 Click Check All and click Apply

***Below are Optional***

5. OpenDNS Setup

Click Advanced Setup > DNS > DNS Server (unckeck enable automatic and replace setting as listed below)

6. DHCP Setting

Click Advanced Setup > LAN (just copy the same settings)

7. Save and Reboot

8. Diagnostics.

If you got below result then you're lock and load. (Gateway and DNS may FAIL but its okay)

I Hard reset mo na yan. Takot ka bang mawalang ng Internet Connection? Malamang takot ka lang hindi makita ang espiya.net

**Need to remove the static IP settings sa PC mo to check if nakaka-pag internet ka na without dialing from your PPPoE and to check kung gumagana ang DHCP mo.

Good Luck brother and Happy espiya.net - ting...

Need Help? Contact the Espiya Helpdesk. CLICK HERE

News:

Author Topic: LAN PROBLEM ! PLS ! HELP ME ! (Read 3830 times)