Topic: 1911 Pistol Spare parts

[siriusblack]

Mga brad, san magandang bumili ng spare parts ng 1911 pistol (colt 1911 Government saka Remington Rand 1911) gusto ko kasi sya modify 2nd hand kasi namin sya nakuha. Saka lahat ba ng 1911 pistols pare-pareho lang?I mean kapag bumili ka ng 1911 parts compatible sya sa lahat? Thanks in advance.

[jarod_tracer]

Twin Pines. they carry most of the brands of 1911.

if you are buying springs go with "Wolf" brand.

in theory you can fit/swap most 1911 parts. but for sure fit, go with the parts that are for the brand you have. especially sa extractor. i've read a lot of horror stories na short/long extractors nabili nila. it helps to have a gunsmith fit them correctly after purchasing the part.

and dont trust ung mga "uy pareho ng baril ko yan. tara kutingtingin natin" most often than not, they dont know/want to tinker with their gun so sayo ung pag experimentuhan.

a few or even 1mm tolerance in a fit can make or break your gun.

[khaliwally]

Try armscor... But better have a gunsmith looking after your upgrade... Unless you know what you doing :

[praeto_RYAN]

go with a reputable gunsmith.  he will be knowledgeable as to what needs to be replaced and what brand will bring the sought after improvement.  have experience with ed brown parts and so far so good.  wolf i heard are sought after by race gun fans.  mine is ed brown parts since that is what the gunsmith pushed then.  kanya-kanya lang yan, kumbaga sa doktor eh kanya-kanyang brand na "tinutulak".  but you'd definitely want to go with branded and reputable parts and not those generic ones.  happy shooting and stay safe always.   

[reg]

lock and load, andun utol ko matutulungan ka nun

[marteniko]

Mga brad, san magandang bumili ng spare parts ng 1911 pistol (colt 1911 Government saka Remington Rand 1911) gusto ko kasi sya modify 2nd hand kasi namin sya nakuha. Saka lahat ba ng 1911 pistols pare-pareho lang?I mean kapag bumili ka ng 1911 parts compatible sya sa lahat? Thanks in advance.

1. Mas mura kung bibili ka sa mga tao-tao. Mahal sa Gunstore.
2. Hindi pare-pareho ang 1911. You need a good gunsmith. 

Bro, ang Remington Rand GI, Pistol yan. Hindi mino-modify yan. restoration ang kalaingan nyan. Once minodify mo yan, presyong martilyo na lang yan. Lalong-lalo na ang Colt 1911 Goverment. Mortal Sin yan. Try to post a pic para mabigyan ka ng tip.

I can't imagine na ang amg GI pistols ay lalagyan ng Magwel na singlaki ng imbudo, Fiber optics at additional serrations. etc. Kung gusto mo, bumili ka ng Arsmcor, Norinco or sams saka mo kalikutin.

[marteniko]

lock and load, andun utol ko matutulungan ka nun

If you are planning to visit LnL, look for Pam aka Ice Queen. Drop my name. marteniko. 

[praeto_RYAN]

If you are planning to visit LnL, look for Pam aka Ice Queen. Drop my name. marteniko. 

masyadong kilala si Maam Ice sa kahit anong forum ng Pinas ah.   

[marteniko]

Here's my restored Remington Rand together with the restored Colt Gold Cup Series 70 (the Rolls Royce of Gold Cup) and the newly acquired (2nd hand of course Colt Super 38)

Eto bro yung sample ng restored RR ko. Bought from Doc Caloy:

From this:




To this:













Together with restored GC series 70



Pinalitan ko ng Walnut grip

[/quote]
 

[siriusblack]

Mga ka-espiya pasensya na at nahuli ako ng sagot..salamat sa mga info napaka-informative. Wala pa kasi alam sa baril baguhan pa lang. Eto po yung photo ng colt at remington rand

Remington Rand



Colt 1911

[siriusblack]

Boss Marteniko mukhang may mahaba ka din ah? ang galing ng pagkakarestore mo nung RR mo astig, sa ngayon ang nabibili ko pa lang ay Pewter grips on the pa lang..hehe, nahahasap kasi ako sa mga nakikita ko na modification ng 1911 sa net kaya parang naeng-ganyo ako.

[marteniko]

 

TS, YGPM.

[siriusblack]

 

TS, YGPM.

Bro full ang inbox mo. nalungkot ako dun ah,pano ba malalaman kung tunay at fake?

[marteniko]

Ok, tutal dito ka na din sumagot, dito din kita sasagutin. Tingnan ko lang bro kung gumagana na yung Photobucket ko para ma post ko dito. 

[erap]

lintik pala tong si marteniko...asteeg...yan pala talaga linya mo..hahaha

sorry ot...

[marteniko]

@Erap, i am not 1911 guru. Mahilig lang talaga. Pinag-aaralan ko din at katulong ang internet at may mga ka-forum sa kabila.


Bro Siriusblack, unahin natin yung Remington Rand mo.



Yung RR (Remington rand) mo, madami ng modifications. Serrations, trigger, rear sight etc.

Pero malalaman mong fake yan:

Slide

> front sight nya kakaiba sa Genuine RR GI. Masyadong mataas yan at hindi proportion.
> Ejection port hindi proportion ang contoured nya. 
> Over all slide, hindi pantay ang bakal nya.

Frame

> Yung Serial number nya bako-bako. re-etched malamang.
> yung tatak na "M1911 U.S. ARMY" sa right side ng slide, yung letter "M" masyadong dikit sa "1911".
> Yung contoured ng moon cut sa trigger guard, hindi proportioned.
> Trigger guard masyadong bilog.
> Yung mag-release botton nya masyadong mataas ang pagkakapuwesto sa
> Yung MSH (Main Spring Housing) hindi sakto ang tambok ng pagka-arched nya. marami pa bro. Lalo na kung ipapakita mo yung left side ng slide.

Eto yung stock na ganyan. Kuha ko lang sa net. Hindi sa akin yan. Hindi ko malagyan ng remarks yung orig kasi ayaw gumana ng Photobucket ko. 





Isunod natin yung Colt.

[raberdaki]

 

sir pa OT san mo nabili yang cute na maliit na kutsilyo mo? hehe

[marteniko]

Eto yung Colt mo Bro:



Actually bro, yang Colt mo mukhang orig. Pero mas maganda kung malinaw ang pics. Kung orig man, wala nang value Maraming binagong masyado.

According to your lower frame, yang unit mo ay gawa noong 1911-1924. Walang moon cut sa may trigger guard. Pero uulitin ko, kaliangan natin ng clearer pics. Eto comparison ng production noong 1911-1924 and 1925 to present.

http://s682.photobucket.com/user/marteniko/media/M1911_and_M1911A1_pistols_zps28409517.jpg.html

Eto ang pics ng isang 1911-1924 restored Colt. Hindi din sa akin yan.
















[/QUOTE]

If you need some assistance, just shoot a PM bro.  

[siriusblack]

ang laki nga ng difference bro, kahit sa mga edges pa lang ibang-iba na ang orig..eto yung kabilang side

[marteniko]

Kung ako sa iyo bro, i-surrender mo na lang. Delikado ang danao. May mga gawa silang makokompromiso ka kung kailnagn mong gamitin. Saka kausapin nyo yung nagbenta sa inyo.

[siriusblack]

Kung ako sa iyo bro, i-surrender mo na lang. Delikado ang danao. May mga gawa silang makokompromiso ka kung kailnagn mong gamitin. Saka kausapin nyo yung nagbenta sa inyo.

Oo nga bro e, family friend pa naman nagbenta sa akin kaya tiwala ako...cge boss next time na kukuha ulit ako ng gamit e magtatanong ako.. 

[marteniko]

Oo nga bro e, family friend pa naman nagbenta sa akin kaya tiwala ako...cge boss next time na kukuha ulit ako ng gamit e magtatanong ako.. 

Charge to experience na lang Bro. Baka hindi din alam ng kaibigan nyong japeyk yung unit. Better kung sa reputable gun store ka bumili. Iwasan mo din sa Sulit. Daming japeyk doon.

In addition, if you want modification, eto o, Norcs ng ilang friends ko. I am also planning to build one in the future if budget permitted.

http://espiya.net/forum/index.php/topic,51540.0.html#sthash.vonR94Vp.tCsaFKRB.dpbs

[siriusblack]

Charge to experience na lang Bro. Baka hindi din alam ng kaibigan nyong japeyk yung unit. Better kung sa reputable gun store ka bumili. Iwasan mo din sa Sulit. Daming japeyk doon.

In addition, if you want modification, eto o, Norcs ng ilang friends ko. I am also planning to build one in the future if budget permitted.

http://espiya.net/forum/index.php/topic,51540.0.html#sthash.vonR94Vp.tCsaFKRB.dpbs

Thanks bro, Tama ka mas makakasiguro ka sa gun store mismo bumili medyo mas mahal nga lang pero sure na orig ang makukuha. Try ko benta yung dalawang 1911 ko kahit palugi,then try ko hanap ng bago na pasok sa budget. Off limits ako sa board bro. Thanks ulit Sir!

[marteniko]

Most of the budgeted Shooters using Norcs as base guns. Let me show show you some units of upgraded Norcs:



This one is simple yet elegant beauty Norc of Bro PG:


Upgraded toy of Bro Jake. Norc again shoots like a hell:



Now, see this care fully: A master piece Norc, again by Jake (Bro Jake, wherever you are pahiram muna ng pics ng Norc mo). This pistol assembled by the finest Gunsmiths (Tony Olinarez, Gil martinez and the legend Manny Sunico)in the country. Gun smithing alone costs almost 40k, no exaggeration:

Jake (aka Clarkhardball) says:

My latest project, single stack with all the bells and whistles. Lower built by Gil Martinez, upper Built by Tony Olinarez, fine tuning and trigger work done by Manny Sunico:


AET Barrel:



Custom Magwell with Lanyard Loop:



Original Bomar, Koenig Hammer, S&A Fixed Beavertail, Kimber Ambi:



Caspian Trik Trigger, Chip McCormick Magcatch, Ahrends Grips with Mag Access Dish:


Flushed Dovetail Frontsight, Flat Top:


Finished in Polished Blue and E-nickel:


CHEERS!

Jake completed this project cost more expensive than Colt Gold Cup. Again, gunsmiths fees alone cost 40k, barrel cost 28k. Jake is a very meticulous person, building a quality 1911 is his fashion.

[siriusblack]

Astig to bro, kaso grabe ang mahal pala... walang ako ganyang budget  ipon-ipon muna ulit..hehe