Author Topic: Help, How to hack Huawei LTE CPE B593U-12.  (Read 4447 times)

aeon14zyx

Help, How to hack Huawei LTE CPE B593U-12.
« on: October 30, 2015, 11:54:27 pm »
May Huawei LTE CPE B593U-12 ako na di na ginagamit sa bahay. Sayang e kaya gusto ko po sana gamitin. Nagtanong na rin ako kay google kaso di gumana yung nagawa ko ei.

Eto po yung steps na ginawa ko.

B593u-12 UNLOCK/ADMIN ACCESS

1. Download ang Upgrader B593_upgrade.exe
at FW from DC-UNLOCKER FORUMS B593.trx

2. Ikabit Ang Lan Cable sa LAN3 o LAN4 sa PC

3. POWER ON ang B593

4. iOpen ang B593_upgrade.exe

5. Select Lan Card kung saan naka Connect

6. Select Router

7. Click Open at Select B593.trx hanapin kung san nyo nilagay

8. I Off mo ang B593 . Bumalik ka sa Upgrade Tool at START

9. I Power On ang B593 at antayin hanggang magkonek na sa LAN

10. LED LIGHT are ON Ibig sabihin START na yan sa pag-Upgrade. Una isa Palang yung Signal Bar ang Umiilaw hanggang sa maging 5 Bars yung Signal. (upgrade takes 5 minute)

11. pag 5 Bars na ang SIGNAL. Click STOP sa Upgrade Tool at i-Close ang UpgradeTool . UPGRADE DONE.

12. Power OFF ang B593 at I-On ulit.

13. Tusukin ang RESET BUTTON sa Gilid ng B593 hanggang mag blink lahat ng ilaw.( 10 SEC only )Try mo mag Log-in ng admin PASSWORD : admin sa 192.168.1.1

Patulong po.

TIA.

MasterChief63

Re: Help, How to hack Huawei LTE CPE B593U-12.
« Reply #1 on: October 31, 2015, 02:58:37 am »
havent we established "hacking" is a taboonword here?
SaayaStrips...

aeon14zyx

Re: Help, How to hack Huawei LTE CPE B593U-12.
« Reply #2 on: October 31, 2015, 03:23:25 am »
I'm sorry. I didn't know. Kindly delete this thread. Thank you.

bodieph

Re: Help, How to hack Huawei LTE CPE B593U-12.
« Reply #3 on: October 31, 2015, 08:56:09 am »
from the steps it looks like its a custom firmware update, so no hacking there. its just a firmware update. seems to be missing a few steps though, first off, for you to be able to communicate with the router, you have to be on the same subnet (i.e. kung nasa 192.168.1.1 ang router, you have to be in 192.168.1.xxx). otherwise the data you send will never reach the router

if the router has DHCP enabled this should be done automatically though. but since we are talking about a firmware update, it would be better to input the IP addresses manually